Keysight N2820A User Manual page 27

Configuring the Probe on
Infiniium Oscilloscopes
N2820/1A User's Guide
N2820A Probes. Although connecting the primary and secondary cables
NOTE
to adjacent channels may reduce clutter, this is not a requirement. For
example, you could connect an N2820A's primary cable to channel 2 and
its secondary cable to channel 4.
To ensure the display of accurate waveforms, always connect the
NOTE
supplied ground lead when probing battery-powered devices. Refer to
"To Measure Battery-Powered Devices"
2 If you are using an Infiniium oscilloscope, continue with
Configuring the Probe on Infiniium Oscilloscopes"
3 If you are using an InfiniiVision oscilloscope, continue with
Configuring the Probe on InfiniiVision Oscilloscopes"
Step 5.
1 On the oscilloscope, click the Setup > Probe Configuration menu
command to view the Probe Configuration dialog box.
For N2820A probes, the probe's primary channel tab in the Probe
NOTE
Configuration dialog box configures both the primary and secondary
channel. The secondary channel is listed on another tab but is not
controlled from that tab.
Making Measurements
Quick Start
on page 31.
"Step 5.
on page 27.
on page 29.
2
"Step 6.
27