Keysight N2820A User Manual page 59

N2820/1A User's Guide
9 On InfiniiVision oscilloscopes,
a Press the front-panel channel key that is associated with the
probe's primary input.
b Click the Probe softkey.
c Press the R-Sense softkey and enter the resistance of the R
resistor that you are using.
10 For future reference, mark your different N2825A heads using a
marker pen or tape and record the information in
page 60. In the table's fourth column, record the name that you
entered in the Probe Configuration dialog box.
Remember to mark your different N2825A heads, using a marker pen or
NOTE
tape, so that you can distinguish between them.
To Identify the R Resistance Using an ID Resistor
SENSE
Using N2825A Probe Heads
Table 7 on
3
SENSE
59