Safety Information - Keysight N2820A User Manual

Safety Information

WARNING
WARNING
N2820/1A User's Guide
This manual provides information and warnings essential for
operating this probe in a safe manner and for maintaining it in safe
operating condition. Before using this equipment and to ensure
safe operation and to obtain maximum performance from the
probe, carefully read and observe the following warnings, cautions,
and notes.
This product has been designed and tested in accordance with
accepted industry standards, and has been supplied in a safe
condition. The documentation contains information and warnings
that must be followed by the user to ensure safe operation and to
maintain the product in a safe condition.
Note the external markings on the probe that are described in this
document.
To avoid personal injury and to prevent fire or damage to this
product or products connected to it, review and comply with the
following safety precautions. Be aware that if you use this probe
assembly in a manner not specified, the protection this product
provides may be impaired.
Use Only Grounded Instruments.
Do not connect the probe's ground lead to a potential other than earth
ground. Always make sure the probe and the oscilloscope are grounded
properly.
Connect and Disconnect Properly.
Connect the probe to the oscilloscope and connect the ground lead to
earth ground before connecting the probe to the circuit under test.
Disconnect the probe input and the probe ground lead from the circuit
under test before disconnecting the probe from the oscilloscope.
General Information
Safety Information
1
15