Keysight N2820A User Manual page 26

2 Making Measurements
Quick Start
Connect Probe to Scope
26
Step 4.
1 Connect the probe to any available oscilloscope channel.
For N2820A probes always connect the primary cable first promptly
NOTE
followed by the secondary cable. This enables the oscilloscope to
automatically associate the two inputs to the same probe.
example of connecting two N2820A probes to non-adjacent channel
inputs.
Figure 8 Example of Connecting Two N2820A Probes to the Oscillo-
scope
Figure 8 is an
N2820/1A User's Guide