Keysight N2820A User Manual page 8

1 General Information
Introduction
Is Your Oscilloscope Software
Up-to-Date?
Keysight periodically releases
software updates to support your
probe, fix known defects, and
incorporate product enhancements.
To download the latest firmware, go
to www.keysight.com and search for
your oscilloscope's topic. Click on
the "Drivers, Firmware & Software"
tab.
Infiniium Dual-Grid View
8
Table 1 Compatible Oscilloscopes with Number of Probes Supported
Oscilloscope
Infiniium Oscilloscopes (firmware version 4.2 or above)
90000A, X-, and Q-Series
9000 H-Series
9000A-Series
InfiniiVision Oscilloscopes (6000 X firmware version 6.0 or above, 4000 X firmware version 3.10 or
above, 3000 X firmware version 2.30 or above)
6000 X-Series
4000 X-Series
3000 X-Series
2000 X-Series
a Dual-Grid View available.
b If secondary cables are not connected.
c On four channel oscilloscope.
d Maximum of 2 probes on two or four channel oscilloscope.
The N2820A probe provides two channel-input cables which allow
two simultaneous views of the current waveform: a high-gain
zoomed-in and a low-gain zoomed-out view. On Infiniium
oscilloscopes, both zoomed-in and zoomed-out waveforms can be
simultaneously displayed in dual-grid view, where each waveform
can be viewed in a different time span. To learn more about
dual-grid view, refer to
Zoomed-In/Zoomed-Out Waveforms"
oscilloscopes do not support dual-grid views. The zoomed-in
channel has 500 kHz bandwidth and the zoomed-out channel has
Number of Probes Supported
N2820A
2 Channel Probe
not supported
a b
2 or 4
a b
2 or 4
b
2 or 4
b
2 or 4
2
not supported
"To Simultaneously View
on page 36. InfiniiVision
N2821A
1 Channel Probe
not supported
c
4
c
4
c
4
c
4
d
2
not supported
N2820/1A User's Guide