Quantum DXi4500 User Manual page 166

Chapter 8: DXi4500 Data Services
Source Role Configuration
144
b To schedule a replication time, select Enable scheduled
replication and enter the date and time to run the replication
process.
Note: Replication should be scheduled to run after backups
are complete. If you do not enable scheduled
replication, replication will only occur if you manually
run it or if you configure Directory/File Based
Replication (see
Replication Configuration
c Click Apply.
3 To manually run the replication process, select the share and click
Replicate/Abort.
Caution: If a system fails during a replication job, the replication
job must be restarted.
The NAS share replication process begins. The status of the current
replication displays in the Status area.
4 To abort the replication, click the Replicate/Abort button.
5 To synchronize the NAS share configured for Directory/File Based
Replication, click Synchronize/Abort. The system will update all files
in the share.
Note: Only NAS shares enabled for Directory/File Based
Replication may be synchronized.
6 To abort the synchronization, click Synchronize/Abort.
Source Role NAS File Based Queue
To access the File Based Queue page:
1 Select a share and click File Based Queue at the bottom of the
Source Role NAS page.
The system displays Directory/File Based Replication statistics for
data sent to the target system.
Source Role NAS Directory/File Based
on page 145).
Quantum DXi4500 User's Guide