Figure 56 Source Role Nas Settings - Quantum DXi4500 User Manual

Figure 56 Source Role NAS
Settings
Quantum DXi4500 User's Guide
Note: The contents of the File Based Queue are dynamic, so the
estimated time for completion and the list of files are
subject to change if items are added.
Source Role NAS Directory/File Based Replication
Configuration
Before you can execute a Directory/File Based Replication, you must
assign the NAS share on the Source system a Sync ID so it can be
replicated automatically to the Target system.
To assign the NAS share a Sync ID:
1 Select the NAS share from the Source Role NAS page and click Edit.
The Source Role NAS Settings page displays (see
2 Select Enable Directory/File Based Replication and enter a Sync ID
in the box. The Sync ID for this NAS share MUST match the Sync ID
configured for this NAS share on the Target system.
3 Click Apply.
The NAS share is now configured for Directory/File Based
Replication.
Chapter 8: DXi4500 Data Services
Source Role Configuration
Figure 56).
145