Quantum DXi4500 User Manual page 99

Hide thumbs Also See for DXi4500:
Table of Contents

Advertisement

Quantum DXi4500 User's Guide
Note: You must use a fully qualified domain name;
character case is not important.
• Primary Domain Controller:
Preferred option if DNS is working: Use DNS discovery
If DNS is not working well or if you cannot ping
abc.def.xyz.com, then use the IP address of the PDC
explicitly.
If you cannot ping the domain name abc.def.xyz.com, you
may not join successfully unless you can resolve
abc.def.xyz.com using the command:
# host abc.def.xyz.com ip_address
where the ip_address is the IP address of DNS as specified
at the bottom of the network page.
• Organizational Unit:
This is optional. There is usually a default organizational
unit such as Computers. If you want to join to an
organizational unit that is different from the default, then
enter the name of that organizational unit as seen in MMC.
• Administrator Name - user1
• Password - <enter password>
Troubleshooting ADS Join Issues
For troubleshooting purposes we will assume the sample settings in
Joining a Domain Using a Domain User Credential
domain abc.def.xyz.com through the remote management pages, but
the operation failed. This assumption is important in that all the
necessary settings were already written in relevant files and you can log
on the server to perform a number of tests to determine the root cause.
1 Is the DNS server specified on the Network page capable of
resolving the domain name?
# nslookup abc.def.xyz.com
or
# host abc.def.xyz.com 10.20.30.40
Chapter 5: DXi4500 Configuration
NAS & OST Configuration
were used to join the
77

Advertisement

Table of Contents
loading

Table of Contents