Quantum DXi4500 User Manual page 96

Chapter 5: DXi4500 Configuration
NAS & OST Configuration
74
Note: When a Samba server is joined to a workgroup, the share
security is managed directly from the remote management
pages. For a CIFS share, security is provided through the
read only or read/write access to the share. By default,
when a CIFS share is created the default security setting is
to allow access for all users. Further access restrictions on
individual users can be managed from the following page:
NAS > Edit.
Joining a Windows Domain
It is necessary to synchronize the server clock and the ADS (Active
Directory Services) server so that the time difference is less than 300
seconds. This can be done by having both servers use the same NTP
server. Once the clocks have been verified:
1 Edit the Windows Domain information as desired (see below):
• Domain Type - Select Active Directory.
• Domain/Workgroup Name - Enter the domain name.
• Primary Domain Controller - Enter the fully qualified name of
the Primary Domain Controller (PDC). Choose one of these
options:
• Use DNS discovery - Let the PDC be discovered
automatically.
• Specify Address - Enter the fully qualified name, or the IP
address, of the PDC.
• Organization Unit (optional) - Enter the name of the
organizational unit in the domain. This is the organization of
which the DXi4500 will become a member.
• Administrator Name - Enter Administrator or any user who
has the right to join a domain. By default any user belonging to
the Administrators group or the Domain Admins group has
the right to join the domain. In addition, any domain user can
join the domain if he is specifically delegated this right by a
member of the Administrators group. See
Using a Domain User Credential
• Administrator Password - Enter the Administrator Password.
Joining a Domain
for an example.
Quantum DXi4500 User's Guide