Source Role Performance; Figure 54 Source Role General Page - Quantum DXi4500 User Manual

Figure 54 Source Role General
Page
Source Role
Performance
Quantum DXi4500 User's Guide
2 Enter the Host Name or IP Address for the replication target and
click Apply.
Use Encryption is selected by default. When Use Encryption is
enabled, data that is replicated is encrypted before it is replicated to
another system. If your data network is already secured, disable Use
Encryption for increased replication performance.
The Source Role Performance information displays the following
statistics:
• Total Data Sent - This field indicates the original, native size of the
data transferred during replication or failback. This does not
indicate the actual number of bytes sent over the network during
replication or failback.
• Total Bytes Sent - This field indicates the actual number of bytes
transferred over the network during replication or failback, and is
usually much less than the native size due to the benefits of data
deduplication.
• Average Send Rate - This field is based on the actual number of
bytes transferred over the network during replication or failback.
They are a measure of the total, number of bytes sent (in MB/sec)
Chapter 8: DXi4500 Data Services
Source Role Configuration
141