Analyzer - Quantum DXi4500 User Manual

Analyzer

Quantum DXi4500 User's Guide
Healthchecks Status
The Healthchecks Status page displays a list of recently completed
healthcheck tests. The outcome of each healthcheck is displayed as well
as when the healthcheck was last run and the status.
This page also shows the state of the healthcheck (enabled or disabled).
To enable a specific healthcheck, select the test and then click Edit.
Select the Enable check box, and then click Apply.
Healthchecks Schedule
Use the Healthchecks Schedule page to configure the DXi4500 to
automatically run a healthcheck. This allows users to control the
frequency at which the healthchecks are run. The schedule applies to all
healthchecks. Healthchecks can be scheduled to run daily, weekly, or not
at all.
• To set a healthchecks schedule, select Daily or Weekly. Use the drop
down boxes to select a start time, and click Apply.
• To disable running healthchecks on an automatic schedule, select
Never, and click Apply.
Use the Analyzer page to analyze network information and disk
information.
To access the Analyzer page:
1 From the Utilities menu, click the Analyzer tab.
The Analyzer page displays (see
Chapter 9: DXi4500 Utilities
Figure 67).
Analyzer
161