Quantum DXi4500 User Manual page 165

Quantum DXi4500 User's Guide
Note: The Last Replication and Last Synchronization columns
display status information only for the most recent manual
replication or synchronization. To view status information
for Directory/File Based Replication, use the File Based
Queue page (see
page 144). To view complete replication history, generate a
replication report (see
The replication status can display the following states:
• In Progress - The replication job is in progress.
• Partial - The replication job was partially completed. Refer to
the log file to view the files that were not replicated.
• Queued and Waiting - The replication job is queued and
waiting for another job to complete before beginning.
• Success - The replication job was completed successfully.
• Failure - The replication job was not completed.
The synchronization status can display the following states:
• Queued - Synchronization has been queued and will continue
when ready.
• Success - Synchronization has completed successfully.
• Recovering - The recover operation is in process.
• Replicating - The replication operation is in process.
• Failed - Synchronization has failed.
The Information page displays during a replication in progress or a
replication successfully completed. The Information page displays
the amount of data transferred as well as the average MB/sec for a
replication job.
2 To enable or disable replication on the share, or to schedule a
replication time, select the share and click Edit.
a Select the Enable Replication check box to enable replication.
Or clear the Enable Replication check box to disable
replication.
Chapter 8: DXi4500 Data Services
Source Role Configuration
Source Role NAS File Based Queue
Reports on page 154).
on
143