Date And Time Configuration; Figure 32 System Date And Time Settings Page - Quantum DXi4500 User Manual

Chapter 5: DXi4500 Configuration

Date and Time Configuration

Date and Time Configuration
Figure 32 System Date and
Time Settings Page
92
The date and time can be set from the DXi4500 pages. Setting the
correct date and time allows the system to provide accurate reports
when events occur on the system.
Use the Date & Time page to set the system date and time.
To access the Date & Time page:
1 From the Configuration menu, click the Date & Time tab.
The System Date and Time Settings page displays (see
2 There are two options for setting the system date and time (select
one):
• (Recommended) Select Use NTP (Network Time Protocol) to
synchronize the DXi4500 to an NTP timeserver or timeserver
pool.
The Select a Timeserver Pool drop down box provides a list of
well-known, geographically-based, NTP timeserver pools. This
option is recommended if you configured at least one DNS IP
address during network configuration.
Figure
Quantum DXi4500 User's Guide
32).