Figure 38 Trap Destination Configuration Page; Table 18 Snmp Trap Selections - Quantum DXi4500 User Manual

Chapter 5: DXi4500 Configuration
SNMP Configuration
Figure 38 Trap Destination
Configuration Page

Table 18 SNMP Trap Selections

104
Destinations
Use the Destinations page to add, edit, or delete SNMP destinations.
To access the Destinations page:
1 From the SNMP page, click the Destinations tab.
The Trap Destination Configuration page displays (see
To add an SNMP destination:
1 From the Destinations page, click the Add tab.
2 Enter the IP Address that will receive the traps generated by the
DXi4500 (for example, 12.34.56.78).
3 Enter a Name for the SNMP destination.
4 Select the traps to be reported (see
Field
Failure
Warning
Informational
Table 18):
Description
If selected, Failure Traps are enabled.
If selected, Warning Traps are enabled.
If selected, Informational Traps are enabled.
Quantum DXi4500 User's Guide
Figure 38).