Access Control Configuration - Quantum DXi4500 User Manual

Access Control
Configuration
Quantum DXi4500 User's Guide
dNSHostName: dx1.abc.def.xyz.com
servicePrincipalName: HOST/ dx1.abc.def.xyz.com
servicePrincipalName: HOST/DX1
7 Finally, the errors from joining ADS domain are logged in:
/tmp/nas/cifs.ads.join
The contents are overwritten each time you join the domain either
from the GUI or by running an appropriate CLI command. The CLI
command is not officially supported. You can run
# nastool
without options to show the syntax. Note that certain
subcommands require a password. If you do not type the password
option, you will be prompted interactively and the password
entered will not be echoed on screen.
Use the Access Control page to add, edit, or workgroup users.
Note: For an ADS CIFS configuration there is no need to configure
workgroup users.
To configure access control information:
1 From the NAS & OST page, click the Access Control tab.
The Access Control page displays (see
Chapter 5: DXi4500 Configuration
NAS & OST Configuration
Figure 26).
79