Snmp Configuration - Quantum DXi4500 User Manual

SNMP Configuration

Quantum DXi4500 User's Guide
• To disable the Email Home Scheduler, clear the Enable Email
Home Scheduler check box.
3 Specify the day and hour of the week when reports are sent.
4 Specify up to four e-mail recipients.
5 Click Apply.
On Demand
Use the On Demand page to immediately send a Status Data or
Configuration Data report to a recipient.
1 From the Email Home page, click the On Demand tab.
2 Select the type of report to send (Status Data or Configuration
Data).
3 In the Send To box, specify the e-mail address where you want to
send the report.
4 Click Send.
SNMP is short for Simple Network Management Protocol, a set of
protocols for managing complex networks. SNMP works by sending
messages, called protocol data units (PDUs), to different parts of a
network. SNMP-compliant devices, called agents, store data about
themselves in Management Information Bases (MIBs) and return this
data to the SNMP requesters.
To access the SNMP page, from the Configuration menu, click the
SNMP tab.
The SNMP page contains the following tabs:
• Destinations
• Community
• Test
Chapter 5: DXi4500 Configuration
SNMP Configuration
103