Security Configuration - Quantum DXi4500 User Manual

Security Configuration

Quantum DXi4500 User's Guide
The Specify a Timeserver or Pool box lets you type the name or
IP address of any desired NTP server/pool. (See
support.ntp.org
servers)
• Select Manual to manually set the system date and time. Click
Edit to specify the system date. Use the drop down boxes to
specify the system time.
3 Select the Timezone.
4 Select the desired time format (24 hours or 12 hours).
5 Click Apply.
To access the Security page, from the Configuration menu, click the
Security tab.
The Security page contains the following tabs:
• Passwords
• SSL
• Login Session
Passwords
The DXi4500 has two levels of security built into the system:
• The Monitor user is allowed to view the DXi4500 management
pages, but not change them.
• The Administrator user can view and edit the management pages.
To set the monitor and administrator passwords:
1 From the Security page, click the Passwords tab.
The Passwords page displays (see
Chapter 5: DXi4500 Configuration
for information on publicly available NTP
Figure
Security Configuration
http://
33).
93