Software Installation; R&S Nestor Setup - R&S TSMA6 User Manual

®
R&S TSMA6
2. Choose the mode of Installation (Local / Remote / Web-GUI).
Remote ViCom Server Local Installation
For details about the local installation procedure, see
tion",
Remote ViCom Server Remote Installation
For details about the remote installation procedure, see
lation",
Remote ViCom Server Web-GUI Installation
For details about the Web-GUI installation procedure, see
Installation",

7.3 Software Installation

Following software components are available for installation on the R&S TSMA6.
●
R&S NESTOR
●
R&S ROMES
●
SwissQual QualiPoc
Before starting with software installation, check the latest TSMA6 firmware release
notes under https://www.rohde-schwarz.com/firmware/tsma6/.
7.3.1 R&S NESTOR Setup
Only execute the dedicated NESTOR setup for R&S TSMA6. The setup file is named
TSMA6_NESTOR_Setup-<Version>.exe.
1. Check that you have a valid TSMA6_NESTOR_Setup-<Version>.exe available.
2. Choose the mode of Installation (Local / Remote / Web-GUI).
NESTOR Local Installation
For details about the local installation procedure, see
tion",
NESTOR Remote Installation
For details about the remote installation procedure, see
lation",
User Manual 4900.8057.02 ─ 01
on page 35.
on page 40.
on page 39.
on page 35.
on page 40.
Update and Restore
Software Installation
Chapter 7.1.1, "Local Installa-
Chapter 7.1.2, "Remote Instal-
Chapter 7.1.1.1, "Web-GUI
Chapter 7.1.1, "Local Installa-
Chapter 7.1.2, "Remote Instal-
44