R&S Romes Setup; Swissqual Qualipoc Setup - R&S TSMA6 User Manual

®
R&S TSMA6
NESTOR Web-GUI Installation
For details about the Web-GUI installation procedure, see
Installation",
7.3.2 R&S ROMES Setup
Only execute the dedicated ROMES setup for R&S TSMA6. The setup file is named
TSMA6-Romes-Setupxyy.exe (Example: TSMA6-ROMES-Setup490p1.exe).
1. Check that you have a valid TSMA6_ROMES_Setup-<Version>.exe available.
2. Choose the mode of Installation (Local / Remote / Web-GUI).
ROMES Local Installation
For details about the local installation procedure, see
tion",
ROMES Remote Installation
For details about the remote installation procedure, see
lation",
ROMES Web-GUI Installation
For details about the Web-GUI installation procedure, see
Installation",

7.3.3 SwissQual QualiPoc Setup

Version 15.2.0.25 or greater must be installed on the R&S TSMA6.
Only execute the dedicated QualiPoc setup forR&S TSMA6. The setup file is named
DiversityProbe4QP-DeploymentKit-<Version>.exe.
1. Check that you have a valid
DiversityProbe4QP-DeploymentKit-<Version>.exe available.
2. Choose the mode of Installation (Local / Remote / Web-GUI).
QualiPoc Local Installation
For details about the local installation procedure, see
tion",
User Manual 4900.8057.02 ─ 01
on page 39.
on page 35.
on page 40.
on page 39.
on page 35.
Update and Restore
Software Installation
Chapter 7.1.1.1, "Web-GUI
Chapter 7.1.1, "Local Installa-
Chapter 7.1.2, "Remote Instal-
Chapter 7.1.1.1, "Web-GUI
Chapter 7.1.1, "Local Installa-
45