Configuration; System; Mode; Power - R&S TSMA6 User Manual

®
R&S TSMA6

A.2 Configuration

A.2.1 System
The "System" window consists of the following tabs.
●

Mode....................................................................................................................... 74

●

Power...................................................................................................................... 74

● Speaker...................................................................................................................75
● RF
A.2.1.1 Mode
The "Mode" tab displays information about the operation mode and the state of the cur-
rent measurement.
Mode of
Current
Mode of Operation
With the "Mode of Operation", the autostart sequence of the R&S TSMA6 can be
adjusted to change the usage of the R&S TSMA6.
Current Measurement
Displays information about the state of the current measurement.
A.2.1.2 Power
The "Power" tab displays all settings related to the power on/power off scenarios.
Startup
Startup
Shutdown
Startup Settings
Configures different startup sequences.
Auto Power ON ← Startup Settings
The R&S TSMA6 starts automatically when power is applied at the DC IN connector of
the R&S TSMA6 or at the DC IN connector of a connected R&S TSMA6 Battery Pack.
Remember Last State ← Startup Settings
The R&S TSMA6 remembers the last state before the DC power was removed.
User Manual 4900.8057.02 ─ 01
Band.................................................................................................................. 75
Operation........................................................................................................ 74
Measurement................................................................................................... 74
Settings.............................................................................................................74
└ Auto Power ON............................................................................................... 74
└ Remember Last State..................................................................................... 74
Delay................................................................................................................ 75
Settings........................................................................................................ 75
└ Auto Power Off................................................................................................75
Usage of the Web-GUI

Configuration

74