Connecting The R&S Tsma6-Bp Battery Pack Unit - R&S TSMA6 User Manual

®
R&S TSMA6
Use only the R&S TSMA6-Z1, R&S No. 4901.0550.02 as power supply.
Figure 5-2: R&S TSMA6-Z1 Power Supply
5.3.3 Connecting the R&S TSMA6-BP Battery Pack Unit
Alternatively, it is possible to power the R&S TSMA6 via the R&S TSMA6-BP Battery
Pack Unit.
To use the R&S TSMA6 with the battery pack, the following steps must be performed.
1. Insert the batteries into the R&S TSMA6-BP.
Note: The R&S TSMA6 may be used only with closed battery cover.
Note: Make sure, that the batteries are inserted in the correct orientation.
Figure 5-3: Battery orientation
2. Attach the R&S TSMA6 with the bottom side (see
R&S TSMA6-BP (see
User Manual 4900.8057.02 ─ 01
Figure 5-4).
Preparing for Use
Connecting Power Supply
Figure 5-5) on top of the
20