R&S TSMA6 User Manual page 53

®
R&S TSMA6
Figure 7-3: USB Stick drive and partition selection
4. To see the available partition of the selected drive use the list partition com-
mand.
The list of partitions appears.
5. Select the drive's partition. Use the select partition 1 command.
6. Make the selected partition active with the active command.
The USB stick is now bootable. End the DiskPart program with exit, see
ure
Figure 7-4: Leaving the DiskPart program
User Manual 4900.8057.02 ─ 01
7-4.
Update and Restore
Master Image
Fig-
51