Connecting Test Mobile Phones; Enabling Untethered Dead Reckoning - R&S TSMA6 User Manual

®
R&S TSMA6
Figure 5-6: Connected R&S TSMA6 and R&S TSMA6-BP
1 = Move R&S TSMA6 vertically
2 = Move R&S TSMA6 horizontally
3 = Power Connection established
The power-up behavior after connecting the R&S TSMA6-BP Battery Pack Unit
(including charged batteries or connected to an external DC power supply) with the
R&S TSMA6 depends on the system settings on the R&S TSMA6 (see
2.1.2,

5.4 Connecting Test Mobile Phones

To use the R&S TSMA6 with test mobile phones, the following steps must be per-
formed.
1. Install the dedicated driver package for the test mobile phone(s).
See
2. Connect the test mobile phone(s) to the USB2.0 / USB3.0 ports.

5.5 Enabling Untethered Dead Reckoning

The following steps are necessary to enable untethered dead reckoning with the inte-
grated receiver (see
1. Mount the R&S TSMA6 device fixed to the frame of a car.
2. Power on the R&S TSMA6 device.
User Manual 4900.8057.02 ─ 01
"Power", on page 74).
https://www.rohde-schwarz.com/driver/tsma6/.
"GPS Ant."
Enabling Untethered Dead Reckoning
on page 11) of the R&S TSMA6.
Preparing for Use
Chapter A.
22