Firmware Installation; Firmware; Remote Vicom Server - R&S TSMA6 User Manual

®
R&S TSMA6

7.2 Firmware Installation

Check the latest TSMA6 firmware release notes under
schwarz.com/firmware/tsma6/.

7.2.1 Firmware

1. Download the firmware setup file TSMx-Setup-<Version>.exe from the product
support database https://www.rohde-schwarz.com/en/firmware/tsma6/.
2. Choose the mode of Installation (Local / Remote / Web-GUI).
Firmware Local Installation
For details about the local installation procedure, see
tion",
Firmware Remote Installation
For details about the remote installation procedure, see
lation",
Firmware Web-GUI Installation
For details about the Web-GUI installation procedure, see
Installation",

7.2.2 Remote ViCom Server

The Remote ViCom Server (rViCom) is an add-on of the R&S TSMA6 firmware pack-
age. It is pre-installed on any shipped R&S TSMA6.
The version of the Remote ViCom server on the R&S TSMA6 and the applied version
of rViCom API on the remote handheld device / smartphone need to comply. In cases
of different client / server versions there are the following possibilities:
●
Downgrade the rViCom server version on the R&S TSMA6 to comply with the used
rViCom version on the handheld device.
●
Upgrade the rViCom client version on the connected handheld device / smartphone
to comply with the installed rViCom server version on the R&S TSMA6.
For more details, refer to ViCom manual and the latest release notes.
1. Download the firmware setup file TSMA6-Setup-<Version>.exe from the prod-
uct support database https://www.rohde-schwarz.com/en/firmware/tsma6/.
User Manual 4900.8057.02 ─ 01
on page 35.
on page 40.
on page 39.
Update and Restore
Firmware Installation
https://www.rohde-
Chapter 7.1.1, "Local Installa-
Chapter 7.1.2, "Remote Instal-
Chapter 7.1.1.1, "Web-GUI
43