R&S TSMA6 User Manual page 70

®
R&S TSMA6
7. In the Windows "Start" menu, select "Services" and check the state of the following
services.
●
●
Figure 8-6: R&S TSMA6 Services
If both services are running, continue with
8. Start the services, that are not running.
a) Select the service to be started.
b) Open the context menu with a right-mouse click.
c) Start the service.
If the services could not be started, reinstall the firmware (see
ware",
9. Try again to start the Web-GUI locally on the R&S TSMA6 via Internet Explorer.
If the Web-GUI can be started, continue with
If the Web-GUI can't be started, a complete restore must be performed (see
ter 7.5, "User Backup and
10. In the Web-GUI , navigate to "Configuration" > "Connectivity" > "WLAN" and check
the WLAN status.
If "Wlan" is "Off" (orange), click "On" button to activate WLAN.
If "Wlan" is "On" (orange), continue with
Note: The WLAN status is also visible via the [State] LED.
[State] LED = blue
WLAN Access Point = On
User Manual 4900.8057.02 ─ 01
R&S TSMA6 running?
R&S WebServer running?
on page 43).
R&S TSMA6 Web-GUI not Accessible
step 9.
step
Restore", on page 47).
step 12.
Troubleshooting
Chapter 7.2.1, "Firm-
10.
Chap-
68