Wcdma Top-N Pilot Scan; Wcdma Top-N Pilot Preferences; Wcdma Top-N Pilot Scan Results - R&S TSMA6 User Manual

®
R&S TSMA6
B.3.3 WCDMA Top-N Pilot Scan
B.3.3.1

WCDMA Top-N Pilot Preferences

To start a WCDMA scan, the following steps must be performed.
1. Choose a frequency band.
The minimum UARFCN of this band is set automatically.
Figure B-7: Setting the WCDMA Preferences
2. If necessary, change the UARFCN according to your needs.
Note: Due to processing issues, it is not possible to select more than one
UARFCN.
3. Click "Start scan" to start the scan.
In the menu inflator on top of the right corner, templates for existing preferences
(Munich and surrounding areas) can be selected.
B.3.3.2

WCDMA Top-N Pilot Scan Results

The WCDMA scan result graph displays one column for each SC found by the mea-
surement. The height of a column represents the RSCP value (in dBm).
User Manual 4900.8057.02 ─ 01
Introduction to Remote ViCom Sample App
Usage
89