R&S TSMA6 User Manual page 66

®
R&S TSMA6
●
●
2. Check the Scanner [State] LED.
●
●
3. The scanner access may be blocked due to a program in Windows Startup.
Connect keyboard, mouse and monitor, open the File Explorer and enter the path:
C:\Users\Instrument\AppData\Roaming\Microsoft\Windows\
Start Menu\Programs\Startup.
●
●
4. Connect keyboard, mouse and monitor and start the Web-GUI (see
"Start the R&S TSMA6
●
●
●
5. In the Web-GUI, verify the connection settings (see
on page 72).
6. Start the TSME Ping tool via the Windows Start menu:
"Start > All Programs > R&S TsmeTools > TSME Ping Utility"
Figure 8-4: TSME Ping Utility - Result
Check the follwoing entries in the program window:
●
●
User Manual 4900.8057.02 ─ 01
Scanner Is Not Found from Software (R&S ROMES, R&S NESTOR)
If it is off, continue with
If it is on, continue with
If it is off, contact R&S support.
If it on, continue with step
Remove any entry which could interface the scanner module, restart the
R&S TSMA6 and repeat
If there is no entry, continue with
Web-GUI",
If the Web-GUI is not accessible, continue with
Web-GUI not Accessible",
If the "Mode of Operation" = "PC Mode", continue with
If the "Mode of Operation" != "PC Mode", switch mode to "PC Mode". After a
reboot, check the mode of operation again.
If the mode does not change to "PC Mode", contact R&S support, otherwise
continue with step 5.
Listening on interface : 192.168.0.1
If the line with this IP address does not appear, continue with
ify Scanner Connection LAN
TSME Found:
– Serial Number
step 4.
step 2.
3.
step 5.
step 5.
on page 24) and check the "Mode of Operation".
on page 67).
Settings", on page 65.
Troubleshooting
Chapter 6.1.1,
Chapter 8.6, "R&S TSMA6
step 5
Chapter A.1.2, "IP Settings",
Chapter 8.3, "Ver-
64