R&S TSMA6 User Manual page 32

®
R&S TSMA6
1. After selecting mode of operation, the R&S TSMA6 reboots.
2. In QualiPoc
3. Touch the plus sign (+) at the top of the screen and touch "NCM".
Figure 6-3: Add NCM
Note: The NCM provides the Bluetooth
4. Touch "Scan" at the top of the screen and wait until the scanning process stops.
Figure 6-4: Scan for NCM
5. Touch "[Disconnected]", touch the TSMA6 scanner in the list, for example,
"TSMA6-900012", and then touch to accept the pairing request.
User Manual 4900.8057.02 ─ 01
®
, touch the main menu
Configuring the R&S TSMA6
, and then touch "Device manager".
®
connection to the scanner.
Measurement Modes
30