Verify Scanner Connection Lan Settings - R&S TSMA6 User Manual

®
R&S TSMA6
7. Start the TSME Device Manager via the Windows Start menu.
"Start > All Programs > TsmeTools > TsmeDeviceManager"
●
●

8.3 Verify Scanner Connection LAN Settings

1. Connect keyboard, mouse and a monitor to the R&S TSMA6.
2. Check the IP setting of the TSMA6 scanner connection.
Navigate to "Windows" > "Settings" > "Ethernet" > > "Change Adapter Options".
The entry "TSMA6 Scanner Connection Int" must be available.
Figure 8-5: TSMA6Scanner Connection
User Manual 4900.8057.02 ─ 01
– Ethernet MAC
– IP Address : 192.168.0.2
– Active FW Version
If no TSME was found, contact the R&S support.
If the R&S TSMA6 device is found, the scanner unit works properly.
If the R&S TSMA6 device is not found, contact the R&S support.
Verify Scanner Connection LAN Settings
Troubleshooting
65