R&S TSMA6 User Manual page 16

®
R&S TSMA6
The LAN interface can be used for Remote Control / Remote Desktop Connections.
Alternatively, it can also be used for distributed applications of R&S NESTOR.
The LEDs on the LAN connector indicate the status of the connection to the host PC.
LED 1 (yellow, link status) is on the left side of the connector, LED 2 (green, activity
status) is on the right.
HDMI Port
The HDMI port can be used for connecting an external monitor. (max. resolution: 2560
x 1600 pixel)
RF IN Connector
The RF IN connector is the RF input of the R&S TSMA6. The multi-band RF paddle
antenna (700 MHz to 2.6 GHz), which is included in the shipment of R&S TSMA6 or
any custom RF source is connected to this SMA connector. The maximum input power
is +20 dBm/10 V DC.
Risk of instrument damage
Do not overload the maximum allowed input of +20 dBm.
Non-compliance destroys the input mixer.
Battery Pack Connector
The battery pack connector is used to connect a battery pack (R&S TSMA6-BP, R&S
No. 4900.9001.02) allowing mobile operation.
User Manual 4900.8057.02 ─ 01
Instrument Tour
Rear Panel View
14