Speaker; Rf Band; Connectivity; A.2.1.3 Speaker - R&S TSMA6 User Manual

®
R&S TSMA6
When DC power is applied again at the DC IN connector of the R&S TSMA6 or at the
DC IN connector of a connected R&S TSMA6 Battery Pack, the power state before
power removal is recovered.
Startup Delay
Configures a startup delay.
Shutdown Settings
Configures a shutdown sequence if the R&S TSMA6 is connected to a R&S TSMA6
Battery Pack.
Auto Power Off ← Shutdown Settings
When activated, the R&S TSMA6 is powered off automatically, if the DC IN power is
removed from the connected R&S TSMA6 Battery Pack.
The time delay for powering off can be set manually (default 30s).
A.2.1.3

Speaker

The "Speaker" tab configures an acoustic warning signal.
Status
Volume.......................................................................................................................... 75
Status (Speaker)
Activates or deactivates an acoustic warning signal.
Volume
Specifies the volume of the acoustic warning signal.
A.2.1.4

RF Band

The "RF Band" tab allows to recall and switch the selected RF band.
Current
New
Current Configuration
Current valid band configuration
New Configuration
Selects a specific band.
A.2.2 Connectivity
The "Connectivity" window consists of the following tabs.
User Manual 4900.8057.02 ─ 01
(Speaker)........................................................................................................... 75
Configuration....................................................................................................75
Configuration.........................................................................................................75
Usage of the Web-GUI
Configuration
75