Chrysler 1997 Stratus Convertible RHD Service Manual page 1023

REVERSE TOR DIAL FLAT CLUTCH PLATE HOOK T OOL PRESS RAM ARBOR INDICA- C-3339 KIT SNAP RING
JX
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 222 Install Flat Snap Ring
Fig. 223 Check OD Clutch Pack Clearance
The overdrive (OD) clutch pack clearance is
1.07 to 2.44 mm (.042 to .096 inch). If not within
specifications, the clutch is not assembled properly.
There is no adjustment for the OD clutch clearance.
Fig. 224 Install Reverse Clutch Pack
OVERDRIVE/REVERSE TOOL 5059A REVERSE SNAP TO JUST PRESS CAUTION: CLUTCH DISCS PRESSURE GROOVE ENOUGH EXPOSE PLATE DOWN RING REVERSE CLUTCH REAC- TION REVERSE MUST SNAP REVERSE (FLAT TION CLUTCH REAC- REVERSE RAISE SNAP RING SCREW- TION PLATE PLATE DRIVER DOWN) PLATE (SELECT) CLUTCH SIDE REAC- RAISE RING TO
Fig. 225 Install Reaction Plate
Fig. 226 Install Reverse Clutch Snap Ring
Fig. 227 Seating Snap Ring to Determine Reverse
Clutch Clearance
SNAP RING SCREW- SCREW- DRIVER
TRANSAXLE
DRIVER
21 - 55