Differential Repair - Chrysler 1997 Stratus Convertible RHD Service Manual

SHAFT OVERDRIVE DIFFERENTIAL COVER BOLTS #3 ASSEMBLY WASHER THRUST
JX
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 233 Install Overdrive Shaft Assembly
Reinstall overdrive clutch and reverse clutch as shown.
Rechecking these clutch clearances is not neces-
sary, as they were set and approved previously.
Fig. 234 Input Clutch Assembly

DIFFERENTIAL REPAIR

The transfer shaft should be removed for differen-
tial repair and bearing turning torque checking.
Fig. 235 Differential Cover Bolts
OVERDRIVE ASSEMBLY DIFFERENTIAL #3 THRUST PLATE SHAFT COVER DIFFERENTIAL TOOL L-4435 ASSEMBLY DIFFERENTIAL COVER
Fig. 236 Remove or Install Differential Cover
Fig. 237 Differential Retainer Bolts
Fig. 238 Remove or Install Bearing Retainer
Remove adapter plate/seal housing on the right side
of the transaxle.
SILICONE RUBBER ADHE- 1/8 INCH BEAD OF MOPAR DIFFERENTIAL BEARING RETAINER DIFFERENTIAL RETAINER BOLTS SIVE SEALANT
TRANSAXLE 21 - 57