Add-ons Specifications
1.2.4
Confiming and Setting I/O Map
I/O map setting
• To use the I/O relays (WX11 to WX36 and WY11 and WY36) in the extension connection
area, open the "Unit selection [Slot No. 0]" dialog box from the I/O map dialog box and
change the number of input words and output words.
• The default is 10-word fixed area each for input and output for the CPU unit.
KEY POINTS
When the number of user connections is changed using the add-on of the
•
built-in ET-LAN, the occupied I/O areas of the CPU will change. Adjust the
starting word numbers of other units or the CPU unit not to overlap the I/O
areas.
1-14