Panasonic FP7 User Manual page 66

FTP Client Function
 Operand [S3] setting (when putting device)
Specify the starting address storing the source device setting or a character constant.
Setting
Settings
item
Source
device
No. of
transferred
data (No. of
data)
S3
Conversion
method
Line feed
position
(Note 1): Input source device setting parameters and each setting parameter separated by a comma ",".
(Note 2): Specify the operation setting parameters in the order of the above table.
(Note 3): When omitting "conversion method" and subsequent items, the conversion method is set to 16-bit binary
and the line feed position is set to 0 (output the end of file only).
(Note 4): When omitting "Line feed position", it is set to 0: Output the end of file only.
4-34
・Global device
Specify device code + device number.
・Local device
"PB" + PB number + "_" (underbar) + Device code + Device
number
<Devices that can be specified>
Global device Local device
WX WX
WY WY
WR WR
WL WL
DT DT
LD LD
Specify the number of transferred data (number of data).
* The number of data that can be trasferred simultaneously is
1MB for all 16 IDs. However, they are calculated with data after
conversion.
Specify a conversion method.
Parameter
No conversion, 16-bit
BIN1w
binary
US 16-bit unsigned decimal
SS 16-bit signed decimal
UL 32-bit unsigned decimal
SL 32-bit signed decimal
32-bit single-precision
SF
floating point
64-bit double-precision
DF
floating point
HEX1w 16bitHEX
HEX2w 32bitHEX
HEX4w 64bitHEX
ASCII character (Output
ASCII
enclosed with "")
Specify line feed position.
0: Output the end of file only
n: Output by n data
Extension (Saving
format)
.BIN (binary data)
.CSV (comma-
separated text)
Setting
range
1 to 524228
(512k
points)
0 to 255