Panasonic FP7 User Manual page 70

FTP Client Function
Setting example
Example 1 S4 "\FTP\PutData1.bin,TOP"
Destination file name: \FTP\PutDdata1.bin, Time data addition setting: Add year-month-day
Settings
data, Automatic addition position: Add automatic additional data before file name
Example 2 S4 "\FTP\PutData2.bin,END"
Destination file name: \FTP\PutDdata2.bin, Time data addition setting: Add time data,
Settings
Automatic addition position: Add automatic additional data after file name
Example 3 S4 "\FTP\PutData3.bin"
Destination file name: \FTP\PutDdata3.bin, Time data addition setting: Add year-month-day
data and time data, Automatic addition position: Not add automatic additional data to file
Settings
name
 Operand [S4] setting (when getting device)
Specify the starting address storing the source file name or a character constant.
Setting
Settings
item
S4 Source file name
(Note): Specify a folder name and file name from the home directory of a user which logs in FTP servers with a
relative path.
 Flag operation
Name Description
Set when an out-of-range value is specified for parameters.
Set when the slot number specified with UNITSEL is not [S1]=100 (built-in ET-LAN).
Latest error
Set when transfer setting numbers are not specified in ascending order.
(SR7)
Set when executed in an interrupt program.
Hold error
Set when the number of characters for operand specifying character constant exceeds 256.
(SR8)
Set when an FTP server that has not been specified with the destination server setting instruction
or the tool software is specified.
CY flag Set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
(SR9) Ethernet initialization active".
(Note): For information of the error codes stored in the system data SD29, refer to 8.1.1 List of SD29 Detail Codes.
4-38
Specify the starting address storing the source file name or a character
constant.