Panasonic FP7 User Manual page 118

HTTP Client Function
 Operand [S3] setting (when Device is Upload and Download)
• Specify the starting address storing the source device setting or a character constant.
• Downloaded data is stored following uploaded data.
The number of acquisitions (the number of bytes) is stored in the first two words.
Setting
Settings
item
Source device
setting
S3
No. of transferred
data (No. of
bytes)
Maximum No. of
acquisitions (No.
of bytes)
(Note 1): Input source device setting parameters and each setting parameter separated by a comma ",".
(Note 2): Specify the operation setting parameters in the order of the above table.
Setting example
Example 1 S3
Settings
Example 2 S3
Settings
Example 3 S3
Settings
Example 4 S3
Settings
5-22
Specify the source device setting.
・Global device
Specify device code + device number.
・Local device
"PB" + PB number + "_" (underbar) + Device code + Device
number
<Devices that can be specified>
Global device
WX
WY
WR
WL
DT
LD
Specify the number of transferred data (number of bytes). (1
to 7 digits)
* The number of bytes that can be simultaneously
transferred is 1 MB for all 16 IDs.
Specify the maximum number of acquisitions (the number of
bytes). (1 to 7 digits)
* Data can be obtained up to the maximum number of
acquisitions.
* The number of bytes that can be simultaneously acquired
is 1 MB for all 16 IDs.
"WX16,32,32"
Device setting, Device division: Global, Device code: WX, Device No.: 16, No. of bytes:
32 bytes, No. of acquisitions: 32 bytes
"DT123456,250,250"
Device setting, Device division: Global, Device code: DT, Device No.: 123456, No. of
bytes: 250 bytes, No. of acquisitions: 250 bytes
"WR0,64,64"
Device setting, Device division: Global, Device code: WR, Device No.: 0, No. of bytes: 64
bytes, No. of acquisitions: 64 bytes
"WL10,128,128"
Device setting, Device division: Global, Device code: WL, Device No.: 10, No. of bytes:
128 bytes, No. of acquisitions: 128 bytes
Local device
WX
WY
WR
WL
DT
LD
Setting
range
1 to
1048576
（1MB）
1 to
1048576
（1MB）