Panasonic FP7 User Manual page 125

 Flag operation
Name Description
Set when any items other than "IDx" or "ALL" are specified for the control target (S1). (x: 0 to
15)
Set when a transfer setting that has not been specified with the transfer setting instruction or the
Latest error
tool software is specified.
(SR7)
Set when any items other than "ENABLE", "DISABLE" or "CANCEL" are specified for the
Hold error
control content (S2).
(SR8)
Set when the slot number specified with UNITSEL is not [S1]=100 (built-in ET-LAN).
Set when executed in an interrupt program.
Set when the number of characters for operand specifying character constant exceeds 256.
Set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
CY flag(SR9)
Ethernet initialization active".
(Note): For information of the error codes stored in the system data SD29, refer to 8.1.1 List of SD29 Detail Codes.
5.3 How to Use Transfer Settings
5-29