Setting With Instructions; Destination Server Setting (Httpcsv) - Panasonic FP7 User Manual

HTTP Client Function

5.3.2 Setting with Instructions

• The destination server setting and file transfer setting are specified with instructions.
• Although they can be specified with only instructions, the setting to use the add-on in the
built-in ET-LAN setting is required. For details of the setting to use the add-on, refer to 4.4.2
Setting with Instructions of the FTP client function.
 List of instructions
Instruction
HTTPcSV
HTTPcSET

5.3.2.1 Destination Server Setting (HTTPcSV)

• Sets the server to which the HTTP client is connected.
• CY (SR9) and SD29 are cleared to 0 when this instruction is executed. (They are set when
an incorrect IP address is specified or Ethernet is initialized.)
• Confirm if "X61: Ethernet initialization active" is OFF before executing the instruction.
• For details of the setting to use the add-on, refer to 4.4.2 Setting with Instructions of the FTP
client function.
 Instruction format
R0 X61
HTTPcSV "SV=0,IPv4=192.168.1.1" "ID=user,PASS=pw"
 Operation unit (i)
• There is no operation unit.
 List of operands
Operand Description
S1 Specify the starting address storing the server specification parameter or a character constant.
S2 Specify the starting address storing the login setting parameter or a character constant.
S3
Specify the starting address storing the detailed setting parameter or a character constant.
 Available Devices (●: Available)
16-bit device
Operand
WX WY WR
S1 ● ● ●
S2 ● ● ●
S3 ● ● ●
5-12
HTTP Server Settings
Transfer Settings
S1
WL WS SD DT LD UM
● ● ●
● ● ●
● ● ●
Application
S2
32-bit
Integer
device
TS TE
WI WO IX K
CS CE
"TOUT=10"
S3
Real
num- String
ber
U H SF DF " "
●
●
●
Index
modifier