Panasonic FP7 User Manual page 64

FTP Client Function
 Operand [S2] setting
• Specify the starting address storing the operation setting parameter or a character constant.
Setting
Settings
item
Specification of
FTP server
Transfer target and
S2
operation
File after transfer
(Note 1): Input operationg setting parameters and each setting parameter separated by a comma ",".
(Note 2): The operation setting parameters cnnot be omitted. Specify thme in the order of the above table.
(Note 3): For details of the transfer operations (overwrite method and rename method), refer to 4.3.4 Overwrite
Method and Rename Method.
Setting example
Example 1 S2 "SV3,PUTFILE,NON"
FTP server: 3, Target: File, Operation: Send (PUT) Overwrite method, File after transfer:
Settings
Not delete
Example 2 S2 "SV1,PUTFILE-OVW,DEL"
FTP server: 1, Target: File, Operation: Send (PUT) Overwrite method, File after transfer:
Settings
Delete
Example 3 S2 "SV0,PUTFILE-REN,DEL"
FTP server: 0, Target: File, Operation: Send (PUT) Rename method, File after transfer:
Settings
Delete
Example 4 S2 "SV2,GETFILE,DEL"
Settings FTP server: 2, Target: File, Operation: Get (GET), File after transfer: Delete
Example 5 S2 "SV1,GETFILE,NON"
Settings FTP server: 1, Target: File, Operation: Get (GET), File after transfer: Not delete
4-32
Specify FTP servers. (3 digits fixed)
SV0: Server 0, SV1: Server 1, SV2: Server 2, SV3: Server 3
Set the target for the transfer and operation.
Parameter string Target
PUTFILE File
PUTFILE-OVW File
PUTFILE-REN File
GETFILE File
PUTDATA Device
PUTDATA-OVW Device
PUTDATA-REN Device
GETDATA Device
Setting for deletig source files after transfer. (3 digits fixed)
DEL: Delete, NON: Not delete
Transfer operation
Send to servers (Overwrite method)
Send to servers (Overwrite method)
Send to servers (Rename method)
Obtain from servers
Send to servers (Overwrite method)
Send to servers (Overwrite method)
Send to servers (Rename method)
Obtain from servers