Panasonic FP7 User Manual page 149

 Operand [S3] setting
• Specify the starting address storing the destination address or a character constant.
Setting
Settings
item
Destination
S3 address
(Host name)
(Note 1): The destination address of S3 can be specified with a hone name only or host name and domain name.
(Note 2): When a domain name is omitted, the destination address is created by the addition of the domain name of
S4.
(Note 3): Multiple addresses can be specified by separating each address with ",".
(Note 4): Upper and lower case characters can be used for sepcifying keywords.
Setting example
Example 1 S3
Settings
Example 2 S3
Settings
Example 3 S3
Settings
Example 4 S3
Settings
Example 5 S3
Settings
Specify a destination address (host name). Specify the keyword "TO=" at the
beginning.
TO=Destination address
"TO=suzuki@sunx.co.jp
Destination address: suzuki@sunx.co.jp, Domain name: Specify
"TO=sato"
Destination address: sato@sunx.co.jp, Domain name: Omit (Specify sunx.co.jp for S4.)
"TO=suzuki@sunx.co.jp,yamamoto@pana.co.jp"
Destination address: Specify multiple addresses, suzuki@sunx.co.jp,
yamamoto@pana.co.jp, Domain name: Specify
"TO=yamamoto,ito"
Destination address: Specify multiple addresses, yamamoto@pana.co.jp, ito@pana.co.jp,
Domain name: Omit (Specify "DOAMIN=" for S4.)
"TO=suzuki@sunx.co.jp,yamamoto,ito"
Destination address: Specify multiple addresses, Domain name: Mixture of Specify and
Omit (Specify pana.co.jp for S4.)
6.3 How to Use Event Mail Transmission
6-21