Panasonic FP7 User Manual page 167

 Flag operation
Name Description
To be set in case of out-of-range in indirect access (index modiication).
Set when the slot number specified with UNITSEL is not [S1]=100 (built-in ET-LAN).
Latest error Set when an out-of-range value is specified for parameters.
(SR7)
Set when executed in an interrupt program.
Hold error
Set when the transfer request of the mail send control relay of a target ID number is 1:
(SR8)
Requesting.
Set when the mail send setting of a target ID number is not set with the mail send setting
instruction or the tool software.
Set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
CY flag (SR9)
Ethernet initialization active".
(Note): For information of the error codes stored in the system data SD29, refer to 8.1.1 List of SD29 Detail Codes.
6.3 How to Use Event Mail Transmission
6-39