Panasonic FP7 User Manual page 110

HTTP Client Function
 Operand [S1] setting
Setting
Settings
item
HTTP server No.
(Essential)
IP address or
host name of
HTTP server
S1
(Essential)
Port No.
(can be omitted)
SSL3/TSL1
authentication
(can be omitted)
(Note 1): Input an HTTP server number, IP address or host name of HTTP server, port number, and SSL3/TLS1
authentication separated by a comma ",".
(Note 2): Upper and lower case characters can be used for sepcifying keywords.
(Note 3): Specify the parameters for specifying servers in the oroder of the above table.
Setting example
Example 1 S1
Settings
Example 2 S1
Settings
Example 3 S1
Settings
 Operand [S2] setting
Specify the starting address storing the login setting parameter or a character constant.
• A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
• When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
• When omitting the part after a specified keyword, omit both "," and "keyword".
• When spedifying "INITIAL" or "KEEP" without specifyng parameters, the unit oprates
according to the table of special keywords.
• It is prohibited to specify the same keyword redundantly. If specified, an error occurs.
5-14
Specify HTTP servers.
Specify the following keywords.
SV0: Server 0, SV1: Server 1, SV2: Server 2, SV3: Server 3
Specify IP address or host name.
For IP address, specify the keyword "IPv4=" or "IPv6=" at the beginning. For
host name, specify "HOST=".
・For Ipv4
IPv4=111.122.133.144
・For Ipv6
IPv6=1111:122:2:1555:0:0:1888
* For IPv4 address, there are unsettable range. For details, refer to 1.1.3 IP
Address Setting Specifications.
・For host name
HOST=HTTP.pidsx.com
Specify port number. Port number range: 1 to 65535
PORT=: Port number (Default = 80)
Specify whether or not to use SSL3/TSL1 authentication.
SSL: Use SSL3/TLS1
NON: Not use (Default: Not use)
"SV0,IPv4=192.255.2.10,PORT=80,SSL"
HTTP server No.: 0, IP address: 192.255.2.10, Port No.: 80, SSL3/TLS1 authentication:
Use
"SV1,IPv6=1111:1222::1555:0:0:1888,PORT=8080,SSL"
HTTP server No.: 1, IP address: 1111:1222::1555:0:0:1888, Port No.: 8080, SSL3/TLS1
authentication: Use
"SV2,HOST=HTTP.pidsx.com,PORT=80,NON"
HTTP server No.: 2, Hos name: HTTP.pidsx.com, Port No.: 80, SSL3/TLS1 authentication:
Not use