Panasonic FP7 User Manual page 119

 Operand [S4] setting (when Device is Upload)
• Specify the starting address storing the destination URL or a character constant.
• Specify a folder name and file name from the home directory of a user which logs in HTTP
servers with a relative path.
 Operand [S4] setting (when Device is Download)
• Specify the starting address storing the source URL or a character constant.
• Specify a folder name and file name from the home directory of a user which logs in HTTP
servers with a relative path.
 Operand [S4] setting (when Device is Upload and Download)
• Specify the starting address storing the destination URL or a character constant.
• Specify a folder name and file name from the home directory of a user which logs in HTTP
servers with a relative path.
 Flag operation
Name Description
Set when an out-of-range value is specified for parameters.
Set when the slot number specified with UNITSEL is not [S1]=100 (built-in ET-LAN).
Latest error
Set when transfer setting numbers are not specified in ascending order.
(SR7)
Set when executed in an interrupt program.
Hold error
Set when the number of characters for operand specifying character constant exceeds 256.
(SR8)
Set when an HTTP server that has not been specified with the destination server setting
instruction or the tool software is specified.
Set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
CY flag(SR9)
Ethernet initialization active".
(Note): For information of the error codes stored in the system data SD29, refer to 8.1.1 List of SD29 Detail Codes.
5.3 How to Use Transfer Settings
5-23