Panasonic FP7 User Manual page 150

Mail Transmission Function
 Operand [S4] setting
• Specify the starting address storing the destination address (domain name) or a character
constant.
Setting
Settings
item
Destination address
S4
(Domain name)
(Note 1): When a domain name is omitted for the specification of the destination address of S3, a specified domain
name is added.
(Note 2): When all domain names are specified for the specification of the destination addresses of S3, the
specification of the domain name of S4 can be omitted.
(Note 3): Only one domain name can be specified.
(Note 4): Upper and lower case characters can be used for sepcifying keywords.
Setting example
Example 1 S4
Settings
Example 2 S4
Settings
Example 3 S4
Settings
 Flag operation
Name Description
Set when an out-of-range value is specified for parameters.
Set when the slot number specified with UNITSEL is not [S1]=100 (built-in ET-LAN).
Set when even one request active relay of mail transmission control relay or mail transmission
logging/trace control relay is 1: Requesting.
Latest error
(SR7)
Set when the domain name of S4 is omitted when specifying to omit a domain name for the
destination address of S3.
Hold error
(SR8)
Set when executed in an interrupt program.
Set when the number of characters for operand specifying character constant exceeds 256.
Set when a mail transmission server that has not been specified with the destination server
setting instruction or the tool software is specified.
Set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
CY flag (SR9)
Ethernet initialization active".
(Note): For information of the error codes stored in the system data SD29, refer to 8.1.1 List of SD29 Detail Codes.
6-22
Specify a destination address (domain name).
Specify the keyword "DOMAIN=" at the beginning.
DOMAIN=Domain name
"DOMAIN=sunx.co.jp"
Domain name: sunx.co.jp
"Domain=sunx.co.jp"
Domain name: sunx.co.jp
"DOMAIN="
Domain name: Omitted
Setting
range
Max. 32
characters