Setting The Unit; Basic Settings; Setting For Scanning Time Display - Panasonic UB-5335 Operating Instructions Manual

Setting the Unit

The various functions in this unit can be set on the
control panel.
Note
• In "Setting the Unit" section (pages 28–30),
procedures are explained using symbols on the
control panel, instead of key names.

Basic settings

Before configuring settings, press
the power.
Contrast Indicator
Remaining Film Indicator
Power Key
Display Window
2-Screen Copy Key
1
Press .
• The unit will switch to setting mode, and
" " is displayed in the Display Window.
2
Press or
to set.
Display
Items
Window
Scanning
time display
File format
Current time
Auto power-
off setting
Output size*
* Only UB-5835 and UB-5865 can be used.
Note
• For information on setting the current time, refer
to page 30.
28
to turn on
Contrast Key
Menu Key
Multi-Copy/Stop Key
to select the item
Set values
(bold values are
defaults)
Off / On
PDF / TIFF
Set the year, month,
day, hour, minute
The power turns off
automatically / Turn
off the power using
the Power Key
Enlarged vertically /
Same size
3
Press to change the settings.
• Each time
is pressed the setting is
switched, and the display on the Display
Window changes.
E.g. Do not display scanning time:
Display scanning time:
4
Press .
• The unit will return to ready mode.
Setting for scanning time
display
It is possible to select whether the time that an
image is scanned is displayed on the image.
[Off]
1
Press .
• The unit will switch to setting mode, and
" " is displayed in the Display Window.
2
Press to change the settings.
• Each time is pressed the setting is
switched, and the display on the Display
Window changes.
Display Window
3
Press .
• The unit will return to ready mode.
[On]
Settings
Scanning time display:
Off
Scanning time display:
On