Panasonic FP7 User Manual page 160

Mail Transmission Function
 Operand [S4] Specification of attached files
Setting item
Attached file name
File name
automatic addition
position
(Note 1): When omitting "File name automatic addition position", automatic additional data is not added to a file name.
(Note 2): Specify the operation setting parameters in the order of the above table.
Setting example
Example 1 S4
Settings
Example 2 S4
Settings
Example 3 S4
Settings
Example 4 S4
Settings
Example 5 S4
Settings
6-32
Settings
Output a device value, and specify the name of a file attached to a mail after the keyword
"FILE=".
FILE=xxxxxxxxx
Specify the position of the automatic additional data added to a file name.
TOP: Automatic additional data is added before a file name.
END: Automatic additional data is added after a file name.
* Automatic additonal data is year, month, day, hour, minute and second
"(yymmdd_hhmmss)".
"INFO=NON,ATT=NONE"
Automatic additional information: Not add automatically, Specification of attached data:
No attached file
"INFO=ADD,ATT=NONE"
Automatic additional information: Add automatically, Specification of attached data: No
attached file
"INFO=NON,ATT=DATA,DT100,10,HEX1w"
Automatic additional information: Not add automatically, Specification of attached data:
Specify device (attached to mail text), Device setting, Device division: Global, Device
code: DT, Device number: 100, Number of transferred data: 10 points (10 words),
Conversion method: 16bitHEX
"INFO=ADD,ATT=DATA,PB100_WR1000,50,US,FILE=PB100_WR1000_50.csv,TOP"
Automatic additional information: Add automatically, Specification of attached data:
Specify device, Device setting, Device division: Local, PB number: 100, Device code:
WR, Device number: 1000, Number of transferred data: 50 points (50 words), Conversion
method: 16-bit unsigned decimal, Addition of attached file: FIL=PB100_WR1000_50.csv,
Automatic addition position: Add automatic additional data before file name
"INFO=NON,ATT=FILE,\Folder\FileName.bin"
Automatic additional information: Not add automatically, Specification of attached data:
specify file (\Folder\FileName.bin)