Panasonic FP7 User Manual page 117

 Operand [S3] setting (when Device is Download)
Specify the starting address storing the destination device setting or a character constant.
Setting
Settings
item
Destination
device setting
S3
No. of transferred
data (No. of
bytes)
(Note 1): Input each setting parameter for the destination device setting separated by a comma ",".
(Note 2): Specify the operation setting parameters in the order of the above table.
Setting example
Example 1 S3
Settings
Example 2 S3
Settings
Example 3 S3
Settings
Example 4 S3
Settings
Specify the destination device setting.
・Global device
Specify device code + device number.
・Local device
"PB" + PB number + "_" (underbar) + Device code + Device
number
<Devices that can be specified>
Global device
WX
WY
WR
WL
DT
LD
Specify the number of transferred data (number of bytes). (1
to 7 digits)
* The number of bytes that can be simultaneously
transferred is 1 MB for all 16 IDs.
"WX16,32"
Device setting, Device division: Global, Device code: WX, Device No.: 16, No. of bytes:
32 bytes
"DT123456,250"
Device setting, Device division: Global, Device code: DT, Device No.: 123456, No. of
bytes: 250 bytes
"WR0,64"
Device setting, Device division: Global, Device code: WR, Device No.: 0, No. of bytes: 64
bytes
"WL10,128"
Device setting, Device division: Global, Device code: WL, Device No.: 10, No. of bytes:
128 bytes
5.3 How to Use Transfer Settings
Local device
WX
WY
WR
WL
DT
LD
Setting
range
1 to
1048576
(1MB)
5-21