Set Mail Text (Smtpcbdy) - Panasonic FP7 User Manual

Mail Transmission Function

6.3.2.4 Set Mail Text (SMTPcBDY)

Set specified texts to the mail text.
 Instruction format
R0
 Operation unit (i)
There is no operation unit.
 List of operands
Operand Description
S1 Device address storing the specified number or character constant
S2 Device address storing text
 Available devices (●: Available)
16-bit device
Operand
WX WY WR
S1 ● ● ●
S2 ● ● ●
 Processing
• CY (SR9) and SD29 are cleared to 0 when this instruction is completed successfully. It is set
when the operation ends abnormally.
• Select the ET-LAN unit built in the CPU and the connection number with the UNITSEL
instruction before executing the instruction.
• Make the event mail setting before executing the instruction.
• This instruction is not available in interrupt programs.
• The text specified by [S2] is set to the mail text of the number specified by [S1].
• Executable when the mail send control relay for the specified number is 0: No Request.
(When requested, an operation error occurs.)
* The unit configuration data of Ethernet never be rewritten.
When the unit configuration data has been already set, it is overwritten and the data
becomes invalid.
• It is executable when the Ethernet initialization active (X61) is OFF. If it is ON when
executing the instruction, an error is set to CY flag and it becomes no operation.
6-34
SMTPｃBDY
WL WS SD DT LD UM
● ● ●
● ● ●
"ID5"
S1
32-bit
Integer
device
TS TE
WI WO IX K
CS CE
DT200
S2
Real
num- String
ber
U H SF DF " "
●
Index
modifier
●