Menu Navigation; [Backup Input Setting] - Panasonic ET-MDNFB10 Operating Instructions Manual

Interface board for 12g-sdi optical
Table of Contents

Advertisement

Menu navigation

This section explains about the on-screen menu (menu screen) that can be operated by installing this Interface
Board in the slot of the projector.
For the menu items with l in the following table, the additional explanation for the target model is described.
Refer to the explanation together with the "Operating Instructions" of the projector.
Main menu item
[DISPLAY OPTION]
[PROJECTOR SETUP]
[MULTI DISPLAY]
[SECURITY]
Note
f This document explains mainly for the operation regarding the input to this Interface Board.

[BACKUP INPUT SETTING]

Set the backup function that switches the signal to the backup input signal as seamless as possible when input
signal is disrupted.
1)
Select [DISPLAY OPTION] from the main menu.
2)
Press the <ENTER> button.
f The [DISPLAY OPTION] screen is displayed.
3)
Press as to select [BACKUP INPUT SETTING].
4)
Press the <ENTER> button.
f The [BACKUP INPUT SETTING] screen is displayed.
5)
Press as to select [BACKUP INPUT MODE].
6)
Press the <ENTER> button.
f The [BACKUP INPUT MODE] screen is displayed.
7)
Press as to select the combination of the input and press the <ENTER> button.
Primary input
[SDI OPT1 [SLOT1]]
*1 This is displayed when these Interface Boards are installed in <SLOT 1> and <SLOT 2>.
8)
Press the <MENU> button.
f The [BACKUP INPUT SETTING] screen is displayed.
9)
Press as to select [AUTOMATIC SWITCHING].
f When [BACKUP INPUT MODE] is set to [OFF], [AUTOMATIC SWITCHING] cannot be selected.
10) Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
12 - ENGLISH
Menu navigation
Detailed menu item
[BACKUP INPUT SETTING]
[SLOT IN]
[STARTUP INPUT SELECT]
[SCHEDULE]
[REMOTE2 MODE]
[CONTROL DEVICE SETUP]
Secondary input
[OFF]
[SDI OPT1 [SLOT2]]
*1
Switches to the secondary input (primary input) automatically when the input signal for primary input
(secondary input) is disrupted.
Disables the automatic input switching function.
Number of signals
constructing one
screen
1
*1
PT-RQ22K
l
l
l
l
l
l
l
Details
Disables the backup function.
Enables the backup function.

Advertisement

Table of Contents
loading

Table of Contents